Industrial rubber synchronous belt
-
Rubber single-sided synchronization belt
Rubber single-sided synchronization belt Classification by tooth shape:
Ladder type rubber single-sided tooth synchronization belt is divided into: the lightest MXL, ultra-light XXL (currently not widely used in the market), ultra-light XL, light L, heavy H, super heavy XH, super heavy XXH, a total of seven, these are the most widely used in the market.
Special tooth type rubber single-sided tooth synchronization belt: The lightest T2.5, light T5, heavy T10, the heaviest T20, there are AT5, AT10, AT20 on the market, and many engineers will ask the difference between these models and non-AT,AT tooth type and T type difference AT the bottom of the arc teeth, and T type for the full ladder teeth, relative AT transmission will be more precise, transmission Smaller gaps, of course, less noise.
Full circular arc tooth rubber single-sided tooth synchronization belt : HTD2M, HTD3M, HTD5M, HTD8M, HTD14M, HTD20M, circular arc tooth synchronization belt transmission accuracy is high, low noise.
Semi-circular arc tooth rubber single-sided tooth synchronization belt : semi-circular arc tooth synchronization belt, also known as high torque synchronization belt, models are: S2M, S3M, S4.5M, S5M, S8M, S14M, this type of tooth synchronization belt is high torque synchronization and high precision synchronization belt, of course, the production accuracy is also high, the price is relatively expensive.
Precision circular tooth rubber single-sided tooth synchronization belt : 1.5GT, 2GT, 3GT, 5GT, 8GT these synchronous belts are still very few domestic manufacturers, mainly imported, the market is not common, generally used for high-precision transmission, imported equipment is common, this type of belt is generally used in automation control equipment.
YU rubber single-sided tooth synchronization belt: 8YU is also a semi-circular arc tooth synchronization belt, suitable for high-speed transmission, high torque, transmission speed up to 1000rpm/min, generally used in medical equipment.
Modified circular arc tooth rubber single-sided tooth synchronization belt : RPP2M, RPP3M, RPP5M, RPP8M, RPP14M tooth type is rabbit tooth type, good turning effect, suitable for high-speed transmission. Generally used for robotic equipment.
-
Rubber double-sided synchronization belt
1, the pitch and tooth shape of the rubber double-sided tooth synchronization belt are equivalent to the tooth shape and pitch of the rubber single-sided tooth synchronization belt.
2, rubber double-sided tooth synchronous belt according to the non-cloth with teeth can be divided into two standard types:
DA type rubber double-sided tooth synchronous belt, both sides of the belt teeth are symmetrical arrangement. Figure (A)
DB type rubber double-sided tooth synchronous belt, the two sides of the belt teeth are arranged in staggered position. Figure (B)
Step type rubber double-sided tooth synchronization belt: D-XL, D-L, D-H, D-XH, D-XXH
Special tooth rubber double-sided tooth synchronous belt: D-T5, D-T10, D-T20, D-AT10
Full arc tooth rubber double-sided tooth synchronization belt: D-HTD3M, D-HTD5M, D-HTD8M, D-HTD14M
Semi-circular tooth rubber double-sided tooth synchronous belt: D-STD8M
Rubber double-sided tooth synchronous belt is mainly suitable for double-sided transmission, suitable for synchronous, simultaneous, double efficiency.
-
Rubber wedges
Rubber multi-wedge with PH, PJ, PK, PL, PM type five models, rubber type multi-wedge belt can be suitable for use in -40 ~ 100℃ environment
Rubber multi-wedge with the following characteristics
1, the belt body is a whole, the transmission time is not the same as the current Angle can be eliminated, can give full play to the transfer efficiency of the tape
2, the transmission power is large, the space is the same while the transmission power of the ordinary V-belt is 30% higher
3, small space location, the same transmission power, the space where the transmission device can be 25% smaller than the ordinary V-belt, compact structure, can reduce costs
4, the belt body is thin, full of softness, can adapt to the transmission of small belt wheel diameter, while adapting to high-speed transmission, with speed up to 40m/s small vibration, less heat, relatively stable operation
5, heat resistance, oil resistance, wear resistance, small elongation, long life
Rubber multi-wedge belt expression method:
-
Rubber open tape
The tooth shape and pitch of the rubber open synchronous belt are the same as that of the rubber single sided synchronous belt. Adopt large size mold spiral cut.
Trapezoidal rubber opening belt: MXL, XL, L, H, XH, XXH
Special teeth rubber opening belt: T2.5, T5, T10
Full arc tooth rubber opening belt: HTD3M, HTD5M, HTD8M, HTD14M
Semi-arc tooth rubber opening belt: S2M, S3M, S5M, S8M, S14M
The above commonly used model parameters are for reference only. Before purchasing the rubber open synchronous belt of other models and specifications, please consult the website customer service to confirm the purchase or call for advice: 0574-63786986
The rubber open synchronous belt body is made of high-quality synthetic neoprene rubber imported from Japan, and is matched with a variety of rubber accessories for different purposes; The skeleton material is high quality glass fiber rope imported from Japan; The tooth surface is protected by nylon 66 high tensile cloth.
Rubber open synchronous belt connection method:
Generally the method of synchronous belt tooth plate is fixed and connected. Please contact customer service at the top website to purchase synchronous gear plate or design.
