HTD3M rubber single-sided tooth synchronous belt design parameters: the tooth shape is circular arc tooth, also known as circular arc tooth synchronous belt, circular arc tooth synchronous belt transmission accuracy is high, low noise. Standard design reference value: Pitch :3mm; Tooth height: 1.17mm; Tape thickness: 2.4mm

HTD3M rubber single-sided synchronous belt design features:

1, The special curved tooth shape of HTD3M rubber single-sided synchronous belt improves the distribution of force and allows for higher overall load.

2, HTD3M rubber single-sided tooth synchronous belt accurate spacing belt teeth to ensure the correct positioning slot in the pulley.

3, HTD3M rubber single-sided tooth synchronous belt surface with tough nylon protective surface, reduce the damage of the belt.

4, HTD3M rubber single-sided synchronous belt is durable and pollution-free to the environment.

HTD3M rubber single-sided synchronous belt Advantages:

1, HTD3M rubber single-sided tooth synchronous belt with large load.

2, HTD3M rubber single-sided tooth synchronous belt without delay. Synchronous belt gear tooth mesh, reduce speed changes. The speed of the continuous push

3, HTD3M rubber single-sided tooth synchronous belt without lubrication, no need to adjust due to stretching and wear.

4, HTD3M rubber single-sided synchronous belt has high mechanical efficiency. The belt reduces heat accumulation and does not require a transfer load because of friction.

5, HTD3M rubber single-sided tooth synchronous belt long-term trouble-free service life.

HTD3M rubber single-sided synchronous belt Identification:

Three parts: Indicates the length, spacing, and width of the belt brought back by the part number. As shown in the following picture. This HTD3M rubber single-toothed synchronous belt model has a length of 111mm and a bandwidth of 6mm.

<img src=”http://df888yxpt.cn/wp-content/uploads/2024/12/1-65.jpg” />