AT5 rubber single-sided synchronous belt design parameters:

The tooth shape is the metric trapezoid tooth, also known as the special square tooth, which belongs to the lightweight transmission design.

Standard design reference value: Pitch :5mm; Tooth height: 1.2mm; Belt thickness: 2.7mm; Angle: 50 degrees

General specifications of AT5 rubber single-sided tooth synchronous belt

(A)AT5 rubber single-sided tooth synchronous belt raw materials: glass fiber reinforced polyester material, neoprene rubber, nylon high tensile cloth

(2)AT5 rubber single-sided synchronous belt load capacity: 60n/mm(343lbf/in)

(3)AT5 rubber single-sided synchronous belt breaking strength: >=80n/mm(457lbf/in)

(4)AT5 rubber single-sided tooth synchronous belt operating temperature range: -40 degrees – 120 degrees

AT5 rubber single-sided synchronous belt tooth spacing:

6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 32 mm, 50 mm

The width of the AT5 rubber single-sided synchronization belt can be determined according to customer requirements

AT5 rubber single-sided synchronous belt Features:

The AT5 rubber single-sided synchronous belt is designed for durable and energy efficient power transmission and linear transmission operations. They are primarily used for endless and open action, with various sizes, structures and toothed designs handling a wide range of loads. AT5 rubber single-sided tooth synchro band urethane is very wear-resistant, fatigue-resistant, and very flexible at the same time. Product quality is visible through numerous details. Tight and accurate tolerances enable perfect tooth meshing.

AT5 rubber single-sided synchronous belt Identification:

Three parts: Indicates the length, spacing, and width of the belt brought back by the part number. As shown in the following picture. This AT5 rubber single-sided tooth synchronous belt model has a length of 450mm and a bandwidth of 10mm.